XKitchens

Project · Richmond Hill

Richmond Hill countertops: laminate to Silestone Persian White, 30 mm

Countertops only: the painted cabinets stayed, the dark laminate went, and polished 30 mm Silestone Persian White went on every run, with one seam on the whole job.

The cabinets in this kitchen had already been painted and had new black handles. What still dated the room was the counter: dark laminate with a rolled front edge, a drop-in sink in the corner and a backsplash lip all the way round. We replaced every counter in the room, the L around the corner sink, the range wall, the pantry run and the little landing counter by the fridge, with polished Silestone Persian White in 30 mm.

Before

A laminate L-shaped counter around a corner sink with painted cabinets, Richmond Hill

After

The same corner in polished white Silestone Persian White, 30 mm, with an undermount sink and no seam near the sink or dishwasher, Richmond Hill Ontario
Before and after: the corner sink L.

The job

TownRichmond Hill, ON
ScopeCountertop replacement on the existing cabinets: corner sink L, range wall, pantry run, fridge landing counter; new undermount sink
StoneSilestone Persian White, 30 mm, polished
EdgeEased edge
SlabsTwo Silestone jumbo slabs, about 61 sq ft of finished top cut into five pieces
SeamsOne on the whole job
BacksplashTile, not part of our work
TimelineMeasured Aug 19, slabs reserved Aug 20, installed Saturday Aug 29, 2026
Warranty2 years workmanship on the countertop, plus the manufacturer's warranty on the Silestone

Decisions along the way

  • Where the seam goes. The corner and the whole right-hand run came out of one 114" piece, about 400 lb, so there is no seam anywhere near the sink or the dishwasher. We walked the route into the house before install day. The one seam on the job sits where you won't look for it.
  • 30 mm stone. At 30 mm the slab has the thickness on its own, so the front gets a crisp eased edge instead of a built-up one.
  • The corner sink. The old drop-in sink came out and a new 34" undermount went into the chamfered corner. The sink cabinet opened to just 34 1/8" at its narrowest, so the sink was checked against a tape before any stone was cut; the stone is rodded on both sides of it and cut to the sink's own template.
  • Every counter, the small ones too. The landing counter beside the fridge got the same stone as the rest, so every surface in the room reads as one. The owner did his own tile backsplash and plumbing.

Before

A drop-in sink in a dark laminate corner under two windows

Install day

A new stainless undermount sink set into the chamfered corner of the white quartz, on install day, Richmond Hill Ontario
Before and install day: the corner sink.

Before

Dark laminate with a backsplash lip beside the range

After

The range wall with white Silestone Persian White counters on both sides of the stove under painted cabinets, Richmond Hill Ontario
Before and after: the range wall.

Before

A dark laminate pantry counter with a rolled front edge over painted cabinets

After

The pantry run in polished 30 mm Silestone Persian White with an eased edge, Richmond Hill Ontario
Before and after: the pantry run.

Before

A small laminate landing counter beside the fridge

After

The landing counter beside the fridge in the same white Silestone as the rest of the kitchen, Richmond Hill Ontario
Before and after: the counter by the fridge.

What it would cost

Silestone is brand-name quartz, in our Designer tier: from $92 per sq ft installed, with the built-up mitred edge on 2 cm stone, one undermount sink cut-out and faucet hole, delivery and installation in the price. This kitchen is 30 mm stone with an eased edge, which is priced on the quote. For scale, a small 30 sq ft kitchen in Designer quartz on 2 cm is $3,036 installed. All prices + HST. See countertop replacement and what each quartz tier includes.